Quote:
Originally Posted by neallewis
As far as I know, you'll need:
U3957 Chassis 4 Cell
U3958 Battery nest 4 cell
5x M3x10mm CS + M3 Washer and M3 nyloc nut
2x Velcro Hook 170mm
2x Velcro Loop 140mm
Everything else is the same. I've got the 1S/4 cell version and looked at what I might need to go 6cell/2S.
|
Thats what I thought so I got the battery nest in the hope that it would sit on the 2 cell chassis (it doesn't, all the fixings are in the wrong place) but when I laid it on the chassis both the outer radius arms toe in quite a bit. So I didn't know if the pod base was narrower too but as its not listed in a 1S and 2S version then I guess it must just be me looking at it wrong. If you want to swap parts PM me by the way. Since I built it my 2S version has been run once. On carpet. For less than 1 minute (to check the steering trim) so its not exactly been hammered
