Quote:
Originally Posted by RogerM
Are you using the longer of the two top shock caps on all shocks? The difference is 1.5mm, equivalent to 3 full turns on the lower eyelets. I believe the WC spec build uses the longer (actually its mid length) lower eyelets (both these & shorts supplied in the kit) which are 4mm longer than the shorts.
Either of those could be the issue.
As I understand it the WC build actually suggests using internal limiters so the must be plenty of shock shaft to spare.
Hope that helps.
|
Hi Roger
What do you recommend me to use? the short cap or longer cap. The WC manual ask to use the long one which is RB5. Short is for ZX5. I notice some setup from Tebo uses the short ones.
How long must the front and rear shocks be? Must i measure from shock cap to shock end? if so what is the recommended length.
Either of those could be the issue.( what do you mean? are they prone to this issue)?
Thanks
Regards
Calvin