Hello,
Thanks for the replies.
Rear lexan wing is from Associated.
http://www3.towerhobbies.com/cgi-bin...P?I=LX2733&P=8
It had large side "wings", but they had to be cut off because of wheel clearance at full suspension travel, so now the rear wing looks quite flat.
I like caster shocks too, but their springs need to be changed to soft ones (blue). Also the washers in between the o-rings have to be sanded down to 0,5-0,6 mm thickness, so the o-rings aren't so crushed, thus easening the shock shafts. If you leave them stock, the shaft movement is not smooth at all. Also I'd love to have some ti-ni coated shafts and better pistons (from caster too, white plastic).