Quote:
Originally Posted by Aran
Rear shock shafts are too long, i ran them for a while and never had a problem but have upgraded to the option shock shafts which are shorter and smoother.
Not sure about the ball cups, I know some people have had issues with them but i found its taught me not to crash :P.
I found the front end was a tight fit when I built mine too, never caused a problem and is solid in a crash.
Hope this helps
|
Fair enough, thanks for the reply.
I wouldnt mind getting the new shock shafts but the way I see it is I shouldnt have to, since it shouldnt have come like this to begin with.
I might just take off the 3mm from the thread and see if I can get the rod end on all the way.
The ball cups I have issues with are only the servo-steering rack linkage, was real sloppy when I built it, isnt any worse now and doesnt pop off but is the cause of some slop in the steering.
My front end was a very tight fit, I had a clearance issue of about 2mm, pretty much had to force it together, didnt like it but had no choice.
And the screw holes did not line up properly, pretty much had to force the screws in on an angle.
As nice a kit as they are when built, I think the build quality sucks.
But saying that, I'm going to be ordering the DEST210, lol.