Quote:
Originally Posted by nevens
Yes, but I quote a Tekin employee (posted yesterday)
Anyway, to put numbers on my previous post, conversion is about $135, battery $250, motor $250, ESC tbd
|
some of your figures are a bit out, the mamba max esc can handle 12cells/3s lipo, but people have run it on 4/5s with ubec's
esc- the BK Electronics 12020 Warrior Car Controller handles 20cells and it $195,
the prefered choice is Quark Monster Pro 125B Brushless Sensorless Speed Controller which is $275, that is a good esc. which can take 6cell lipo.
motor- the Feigao/Nemesis/Wanderer "XL" brushless motors in usually 7xl form are fine for it, thats $92 from rcmonster
battery is dependant on what you go for, maxamps and flightpower are the best
quick prices
Lipo 6300HV 4S3P 14.8V Pack $280
Lipo 6300HV 18.5V Pack $320
Lipo 10000mah 4S 14.8V Pack $250
Lipo 10000mah 5S 18.5V Pack $300
Lipo 10000mah 6S 22.2V Pack $350
for conversion take out any nitro bits so all that should be left is the steering servo and a receiver. mock up where everything will go, then get hold of some aluminum and make a motor mount. secure everything else, jobs a good 'un