Quote:
Originally Posted by dale
I thought that would be the case. The X12 is a very fast and well made motor, and can take crazy temperatures. But for some reason it can have sensor issues with some ESCs and firmwares. If you send the ESC back they will say its fine. If you send the motor back they will say the same. Sometimes the two just don't like to work together.
One thing to do is make sure you're running the 4dot insert for lowest motor timing. Also make sure that any shims on the rotor are at the pinion end to get the rotor as close as possible to the sensor. Finally, search on RCtech to see what firmware people recommend for your ESC with the X12 motor.
|
I am running the 4dot insert, thanks Dale I'll check rctech later and buy the USB bridge.
Mark