Quote:
Originally Posted by Alan Reeves
I've changed from a lpf servo to a full size one, and am now going to try 10g up front this Sunday.
If I dont have the slipper set quite loose it likes to wheelie, also I have struggled with on power steering but seem to be dialing that in now.
Settings from last meeting at arena x (carpet and wooden features)
Front
20mm ride
0*toe
1*camber
camber link... outer on hub, outer on tower two washers
30* castor
4 trailing
extra 1.5mm spacer on outside steering link
inner steering link rear position
Yellow spring 450 oil 1.2*6hole
shock location middle on tower, outside on arm
Stagger ribs (dremmelled)
droop screws in a bit and balanced but not measured
Rear
20mm ride
3* toe,
1*camber
link No washer, 3rd hole from wheel
3*kick up
400 oil 1.3*6 hole
Black spring
Shock middle middle
Dboots nanobytes
|
Are you running rear motor or mid motor config?