It's been a while since I have driven a XXXcr but came across the following when having a sort out the other day, it was from running nimh's, but might be a good starting point:
Front
35wt oil
#56 piston
blue piston spring
Shock position outside on arm 2 on tower
1mm limiter fitted
Camber link position 2 B with 2mm under bulkhead ballstud
spindle height bottom
Camber -1 deg
Ride height wishbones level
short vla
Rear
30wt Oil
#55 piston
Red Springs
Shock position outside on arm 2 on tower
Camber link 3 E with 1mm washer under hub ballstud
2.5 Degree anti squat
long wheel base
Camber -1
Ride height driveshafts level
short vla
Mini Pins all round, two outer and one inner row of pins removed from front and rear tires.
I've also got a note about running a ballstud on the front hub kingpin instead of B on hub. Think this required some filing of the hub, and then mount the camber link in hole 3 on the bulkhead.
|