[migsy]

get a 60 oil in the front with blue springs. std piston (use the middle holes on the shock tower and wish bones for shock position.
-1 camber use the camber pick up on the inner side to make it as long as possible, this should take the snatch out of the turn.
1deg toe-in. this should take you in quickley but alow you to come out with no oversteer.

get a flu-yellow spring on the back with a 35oil in the shock std pistion. (use the 2nd inside hole on rear shock tower and 2nd hole on wishbone to place the shock body at the rear.
use -2 deg camber inner pickup on shock tower - middle pick up on upright block. use 2.5 toe-in block on the rear (standard)

this is how i've set mine up and it went well for me.

hope this helps.

reguards..Alan