Right, got the final costs for all the components in and the RRP would be £55. In the kit would be the following;
1 x 2.5mm carbon fibre T-piece
2 x anodised aluminium gearbox cradles
1 x anodised & engraved RF pivot block
1 x anodised & engraved RR pivot block
4 x hinge pin mounting balls
4 x 1.0mm shims
2 x 2.0mm shims
4 x 20mm countersunk screws
2 x 10mm M3 countersunk screws
4 x M3 nyloc nuts
Optional RF & RR pivot blocks to change the track width and toe in would be £12.00 - there will be 2 of each available to give a toe range of 2.5-4.5 degrees and track width options of between -1.5 and + 1.5mm.
Any feedback would be great. If there's enough interest then I'll get a batch produced.
|