Andy,
Woody is now part of the team
The best thing you can do is ring Lewis and talk to him about the release date, I haven't had chance to speak to him as I've been on holiday.
Woody, he's a decent starting set-up:
Front
6 turn springs
Kit pistons & rebound valves
30 wt oil
Push rods mounted on top of rockers
0 degree toe in - may need 1 deg toe-out at Worksop (an old trick we used to use)
-1 degree camber
Castor - right back
14mm ride height - or lower at Worksop depending on bumps, but ride height has a big influance on steering on the Pred as you probably know. I like to see the front of the car 'working' i.e. moving up and down a little.
Rear
5 1/2 turn springs & pre springs
Kit pistons
45 wt oil
Middle hole rockers
4 degrees toe-in per side
-1 degree camber
22mm ride height - or lower at Worksop, but drop front and rear the same.
Hope that helps, wish I could make it to Worksop, next time for sure.
What motor are you running?
G