Tony gave me this setup for carpet the other day for my rb5 vega with small bores
Worked very well i thought
very responsive
Front
40w oil no. 3B piston with silver spring.
Middle on the tower and outer on the wishbone
Stagger ribs yellow with no foam insert - cut the wheel so it's narrow.
Rear
30w 3B piston oil with rear silver spring
middle on tower with inside on wishbone
The rear link make as long as possible on the hub (furthest out) and short high on the tower.
Short wheel base
Ride height at 21mm all round
90g under esc weight only
I ran it with the 0 degree rear hubs & 30 degree front
Hope that helps