Hi,
Most the TC3 spares are still available from the distributor including wishbones, steering blocks & castor blocks and the compsite driveshafts.
Any shop that deals with CML will be able to order those in for you and the distributor can still get them from AE.
The wheel nuts are imperial not metric so you'll need 8/32 thread nuts and an 11/32 driver to tighten them with.
Not sure on the rear hub system is on your car though - but it's not the standard TC3 set-up.
Looks like the front set-up is replicated on the rear. This does give the option of adjusting the toe-in, but using it with a castor block doesn't seem right if it is changing the anti-squat - unless they are the 0 degree blocks... Might also want to be careful if you need wishbones for the back - they may have been changed for front ones so the other items fit.
|