Quote:
Originally Posted by BeachBuggyPhil
Some core need a bind plug that goes in the receiver, later core models have a bind button on the receiver, what model do you have? Blue receiver or black?
|
+1.
This is true.
The old black DHSS setup needs the bind plug and is a bit of a sequence to get right.
Heres what to do.
- switch on tranny
- press ENTER to go into menu mode
- press DOWN until you get to MIX
- press ENTER
- in the Mix menu, set this to something which I cant remember (sorry!) but there are only 2 options - I think its called SET or SETUP or similar.
- Tranny will display "SET OK..."
- while the tranny says this, now insert the BIND plug into the BIND port on your receiver
- power up your reciever.
- the corner light should flash green for a second or two, then solid when it has found the tranny and binding has occured.
- power off the receiver
- press EXIT on the tranny to return to normal operating mode.
- power off your tranny.
- binding is now complete.
In many times of using the DHSS Etronix / Core system, Ive never had an issue with losing the bind.
Hope this helps
