Quote:
Originally Posted by RudeTony
No limiters INSIDE the shock mate.
Outside on the shaft only fit a spacer or 'O' rings like I have.
You may even have to fit longer ends on the shock shafts to get enough droop.
I assume you have the WC BB tower of course
|
I fitted the longer ends - part number LA43 5.8mm Ball End(12pcs)
Still not sure if I have it right at present etc.
I've started with 37.5 standard pistons and 30 drilled 1.4 x 5 hole on the rear. Rear I think is too stiff for me at present. Made some changes this week, but I'm not racing for a few weeks.
Indoors I'm planning on 40w front 30w rear standard pistons front, drilled 1.4 rear.
I have a variety of Nick's pistons to to try:
5 x 1.4
5 x 1.5 - too big IMHO
6 x 1.2
4 x ? - need to check
5 x ? - need to check
For TORCH I think the tapered pistons will work, but just need to find the right balance.
I also have a set of standard bore shocks knocking around, but need to come off the Laser as I didn't like it with them on.