Quote:
Originally Posted by dobber
502x question.
Im struggling with ride height. I see your setup for taplow was 18mm. Currently mine is sitting at about 26mm. How do i get it lower and sit near that illusive 18mm.
Question about diffs too. How tight do you set them and is there any deffinative way of setting them up. I think that my diffs are too tight but as i have no reference point to work from im kind of stuck. I slackened off my rear diff just a tad the other week and it made the rear of the car spin round when cornering. Any tips of hintrs on these two would be great.
Cheers.
Even better than that why not pop along to Surrey & Hants Radio Controlled Car Club one thursday night   |
I will try to pop along soon!
ride height...well your car could be running very light? i have aruond 60g of rudebits in the back of mine.
You will also need to cut the rear spring down to get the required height. Take 2 coils off it.
Then you should be fine!
Diff tightness.... its difficult to explain, i will do a video soon, just make sure the front is tighter than the rear and neither are slipping!
Lee