Quote:
Absolutely DON'T do the screw holes because it will mess up the alignment of parts during construction.
In fact my advice is to not bother with gluing the parts at all. Delamination is not a realistic risk, I have been running carbon chassis cars for a decade or more with no glue and have never had a problem. You are more likely to cause problems with parts not aligning properly, the edges are cut to a certain size for a reason.
|
It wouldn't actually mess the alignment of anything as long as he didn't get glue on top side of the chassis, it does however mean the screws may protude past the bottom of the chassis if put on too thick, the glue round the edge of the chassis doesn't effect anything anyway so thats no big deal.
BUT I do agree to somewhat extent that its not really necessary, I've done cars both gluing and not and not had any problems with either so....its more of a personal preference.