Quote:
Originally Posted by B3.is.King
So I charged the battery via 2s balance, voltage set to 7.4v and capacity to 4000mah.
The battery finished stating full capacity at 1959mah and a final voltage of 8.4v.
So what has happened?...
Was the battery partly charged, and only 1959mah needed to bring the charge up to 4000mah?
|
You have topped the lipo up to full..8.4v
It took 1959mah to reach full from its purchaced capacity
use it and re-charge in same way
next time it reaches full the mah reading is what you used in that race
Do not run lipo too low(use a cut off)
Dave