Quote:
Originally Posted by B3.is.King
So I charged the battery via 2s balance, voltage set to 7.4v and capacity to 4000mah.
The battery finished stating full capacity at 1959mah and a final voltage of 8.4v.
So what has happened?...
Was the battery partly charged, and only 1959mah needed to bring the charge up to 4000mah?
|
Yes, lipo should be stored with partial charge, most will do thier last 5 min run, disconect them and leave them till next time, the concious may stick them on a charger and use storage mode, NEVER store them flat or full