Quote:
Originally Posted by oli4ke
Below you can find a link of a draw from the rear option house diff (W-0108)
Please use the link and see page below, second diff of the 3.
You can see on the right hand side of the diff housing, first you have to glue the yellow pulley flange on the diff house, second you need the WBD-4 pressure plate then you need the plate holder and at last you have the big black spacer, bearing etc...
http://www.rc10talk.com/download/fil...6020&mode=view
The big black spacer that goes in your rear diff house (ref link) is not included in WBD-5 and is only available in WBD-1 bag!
Number 59 2ea plate holders are present in WBD-1 and WBD-5 bags! |
Yes exactly ! it should pe part number 3 in these instructions !