As promised are some shots/info on the front push rod mod.
This is basically like moving the shocks in on the wishbone on a conventional car.
Team Xtreme made me up this kit to do this, drop them a line if you want a kit.
Basically its some longer bolts, blue conical washers, turnbuckles and rear shock posts.
Here are some pics:
Basically you need to cut the rear shock tower mounts off flush so you make a rectangular block, then line up and mark the blocks on the wishbones in the corner near lower ball joint, drill out with 3mm drill bit and fit. Use ball joints of old turnbuckles and re-fit to new shorter turnbuckles.
Mount the new short turnbuckles with longer bolt and conical washer on top of rocker and job done!