Quote:
Originally Posted by NTS
Gunter,
You don't say what FDR?
I have been running a little more boost than that, 30 and coming off at about 75°C with an FDR of 8.0.
By the way latest software is 930stock but I think 211 is better if anything.
Nick
|
O Sorry my bad, FDR was either 7.9 or 8.3 not 100% sure what pinion i was running i was testing so much stuff.
Yea i no people are running higher around 26deg i started at but was to hot so took abit off, ive seen people running over 30 and coming off at 80c but ive found with the LRP motor its very dependent on the strnegth of the magnet, weaker the mag the cooler it runs but the more timing needed so if ur Rotor is fairly old u'll need more timing to get the same performance. could i ask what your running?
I may be wrong but this is whats ive found, ran the same settings on my 10.5 and it was rapid even turned up the boost and stayed cooler than the 13.5 which confused me rather.
O is there a new one? could i ask whats different about it?
i cant find it on the HW site could someone send me the link?