[tyreman]

Front
Toe - 0
Ride Height – Chassis Level With Rear
Camber - -1
Caster - Std
Sway Bar - None
Oil - 40
Piston - Orange
Spring - Blue/Black
Limiters - None
Spindle Location - Low
Steering Ackerman – Rack
Bump Steer - 0
Camber Link - 2A(1 gold washer)
Shock Location - 3 Middle
VLA - Short
Font Wing - No
Notes - 10g infront of servo and 5g either side at the back of servo

Rear
Toe-In - 3 inboard flipped upside down
Pivot Support - Std
Rear Hub Spacing – Middle
Driveshafts/Outdrives – Steel dogbones/steel outdrives
Ride Height - Driveshafts just below Level
Sway Bar - None
Oil - 40/45
Piston - Blue
Spring - Red
Limiters - Inside 0 - Outside 0
Camber Link – 6C 2 gold washers under the ball stud
Shock Location - 2 Middle
VLA - Long
Wing - XXXcr half gurney (without extra element)
Wing Position - Low
Battery Position - Forward
Notes - 15g at the back of chassis 20g behind the battery foam

Gearing - LRP 6.5 bonded 84/23
Speedo settings - 2-1-2-2