Also the forward mounting points for the rear wishbones are differant. On the egress and avante 2001, you have to attach a reinforcing plate, counter sunk screw which then has a steel reinforcer bolted over the top and with a second bolt furthur forward.
If anyone wants to get an egress chassis part set made up i would happily loan all the parts needed.
I have fitted mine with the shocks from a 511x however the front shock tower needs a redesign for this to work properly as the tower is too short to get a decent range of travel, the angles are just all wrong.
Just spotted the front lower shock mounting point is a copy of the avante 2001 rather than the origanol egress offset mounts which move the pick up point inboard and lower.
|