[Chrislong]

Minty, as you saw mine was pretty well balanced and I drove it hard - really pleased with it:

Front shocks:
35wt #2 ae pistons, blue springs, 2 limiters.
Mounted inner on tower, inner on wishbone.

Rear Shocks:
30wt #1 Ghea pistons, silver springs, no limiters.
Mounted 2nd front inner on tower, inner on wishbone.

Camber Links:
Front inner on hub, inner on tower, 1 washer. 2degree
Rear 3rd from bottom on tower, outer on hub. 2.5degree
1 degree Antisquat. Long wheelbase. Trailing axles.
0 degree rear hubs. 0 degree front toe
Front axles mounted low, 2 bumpsteer washers.

No additional brass items.
10g lead under steering bellcranks. 10g either side of Lipo's, 5g each side at rear of Lipos.

Wing is an HB high downforce wing, gurney left full.
7.5 HPI motor geared 24/81.