So far, I've bought spur gears (FTX 6275), the whole slipper clutch (FTX 6266) and a spare bracket to connect the slipper to the rear diff (FTX 6272). All of which work just fine with the Blast.
Looking at the images for other parts, the bodyshell, motor mount (FTX 6258) and the drive shaft (FTX 6265) also look compatible.
Infact, pretty much everything apart from the steering knuckles looks similar.
As for the 65t spur gear, I've had a couple strip quickly (2mins), but I think that's because it couldn't cope with the gearing (27/65) that I'd put in, and they're fine with about 20t pinion.
|