Is this on an RB5 version?
If it is are you running in the additional inside hole on the wishbone? This will give more drive. Also stand it up on the tower.
Run the inner rear ballstud on the lower row of holes.
Remove weight from the front and shift to the back. You can add about 20g either side of the motor.
If you are on small bore shocks try black rear springs. I ran these most of the time on high grip too but it will give more grip.
Make sure the rear driveshafts are level.
Short wheelbase if you are not already.
This is probably where you'll tell me it's not an RB5 but the same rules will apply anyway!
Kev
__________________
Call us on: 0151 336 7315
|