My current setup.. (Very close to Matt O's old setup)
Currently lacking mid corner on carpet..
Front
35wt Oil (losi)
Piston 2c
Orange spring #55
Outside hole on wishbone
Middle on Tower
Wide Track
Inner link position - middle with 2 washers
Outer link - long
Pivot block spacers - None
Kick up - 30 degree
Rear
27.5wt oil (Losi)
Piston 3a
Blue Spring #68
New Inside hole on wishbone (drilled one hole in from original postion)
3rd hole out on tower
Wheelbase - short on hub, short inner
Camber link inner - lower, outer hole
Camber link hub - (1 deg alloy hub) inner hole (shortest-alloy)
Roll bar - none
-1 Degree camber all round.
Tyres - Yellow Mini pins rear and staggers front (old style, no foam)
Inserts - medium
Rudebits under speedo weight - 92g
Rudebits under lipo weight - 62g
Rudebits under servo weight 28g?
Wing - Team Xtreme med downforce
Vega steering links
|