if you are racing on gravel tacks, you might want a little more ground clearance so your chassis doesn't rub. If you look at your chassis under the susp. arms you will see that the chassis actually touches the susp. arms. This is because the car used to be a tc, and the arms didn't have to have any droop. On an offroad car this can greatly increase the traction on bumpy surfaces. Take a look at your chassis from the bottom, mark a line with a silver sharpie, and then take everything off of your bottom chassis. Tske s dremmel and carve along the line. Finish off the rough edges with hand sanding. Stay away from the steering assemblyand just carve out enought for the arm to pass by.
|