Hi Guys,
Right this weekend is going to be the first time I have ever run SP ESC & I'm little bit worried don't want to fry anything.
All these functions are newbie to me worried I may have it set wrong or need to change it.
Right so this is what I currently have setup -
Software: V1.07_110119
1: Running Mode = For/Brake
2: Drag Brake = Custom 11%
3: Voltage Protection = 3.0V/cell
4: "DRRS" Punch = Level 3
5: Brake Force = 62.5
6: Reverse Force = 25%
7: Initial Brake = Drag Brake
8: Neutral Range = 9%
9: Boost Timing = 0
10: Turbo Slope = 24
11: Overheat Protection = Disable
12: Turbo Timing = 0
14: Turbo Delay = Off
The car is RB5 SP2 with SP V3 10.5 with 27t pinion which is what I worked out on due to the size of the straight.
The spur on the RB5 is 78t too.
What else do I need to do or shall I just see how things go?
With this setup will it give me more top end speed or do I need to change something on the settings?
Just worried may have it wrong just wasted my monies
Thanks