Quote:
Originally Posted by ottoswe
Oh YEAH!! run 1-2mm limiter or put 3mm and inside hole on front wishbone just to try it...
white springs in the rear.. and motor as far forward as possible..
my car was perfect when grips was low.. but for highgrip it was abit twitchy.
still the best 2wd ever
|
So, yesterday I built my shocks with cut bladders, 55 pistons, 27.5 wt up front, 25 rear, and an internal spring in the front shocks. I used the front springs off a Micro Highroller that I cut in half. The wire is 0.25mm, and they were 1.5mm tall when compressed, about 3.5mm free.
Since this is quite far off the other shocks I've ran with bladders, 56 piston and 20 wt rear, I can't really tell if the springs made the difference, but the car was dialled
