Thank you for your reply.
The third solution was also my first thought, but the rear bumper is fixed through the screws underneath the aluminium brace. I'll check if I would need the threads in the aluminium brace for a rear motor configuration, if not they are virtually already gone...
Quote:
Originally Posted by Cream
Yeah going off your image you only have the three possible options. clear the threads out of the aluminium brace , remove the retaining section of the top block or 3rd if the caphead is small enought to fit in the retaining hex put the bolt in from the top and use the thread in the aluminium brace to hold it all together.
|