Thread: Pinion Gears for 3.17mm shaft motor?
View Single Post
  #3  
Old 07-10-2011
Jamie.T's Avatar
Jamie.T Jamie.T is offline
Mad Member
  
Join Date: Feb 2008
Location: Crosshands, SW Wales
Posts: 1,421
Default
STD 1/10 car pinions use a 1/8 shaft (3.175mm), but these are called 3.2mm to round it off. Any STD 3.2mm pinion will fit your 3.17mm shaft without excessive play.

Hope this helps.
Reply With Quote