Hi yah
I would be starting with the following
Front
40w Oil Losi
Piston 3A - Silver Spring - It will feel stiff
Shock mounted outside hole on wishbone and middle on the tower
On your front link have 2 mm washer under the inner side and mount on middle hole and the outer link on long position
Kick up - 30 degree
Rear
30w Losi
Piston 3a with a Cobalt Spring
Inside hole on wishbone and outside hole on tower.
Long wheelbase is normal for me but if twisty then short.
Put your camber link inner on the lower outer hole of the tower with it at the longest on the hub - go upper row of holes on tower if you need more side bite
0 deg rear habs
Under speedo weight - 92g and this never comes out of mine!
Under Lipo weight should be adjusted subject to what type of track.
If there are little jumps, rumble strips etc that upset a normal car then run under lipo 74g
Schumacher Staggers up front - old type with no foam
Schumacher pins on the rear
Good luck and let us know how you got on.
If you are same venue as me then come to see me.
|