personally I would recommend looking on ebay and see if you can find a Iwata revolution at a good price make sure its gravity fed like the one ive linked here (if your lucky you will get hose and air filter with it)
http://www.ebay.co.uk/itm/Iwata-Revo...item19c891de92
I would try and get a half decent compressor (something that will provide upto at least 80psi)
And finally for paint, liquid mask etc contact Jon Miller and get some createx paint.
Heres the stuff you will need
- airbrush
- hose to fit from airbrush to compressor (may require a few fitings from local plumbing store)
- regulator (machine mart have these at around £10ish)
- Compressor
- Paint, liquid mask
- Highly recommend a Paint mask, (These are quite expensive around £25ish, but highly necessary in my opinion)
I dont think I've forgot anything but heres a couple of sites I'd look at for the stuff you need.
http://www.everythingairbrush.com/ac...mpressors.html
http://www.rcsgraphicworx.com/shop.htm
and obviously keep a eye on ebay for bargain deals
hope that helps somewhat.