Quote:
Originally Posted by F1END
I couldn't find a proper Tamiya one when I needed it, so I got the 3-racing one and it's been fine. Some ceramic diff balls will help too.
I'd definitely recommend the alu suspension mounts, and a set of metal suspension balls (TA50994). Don't think I've had an arm pop out since putting those on.
As far as gear ratio goes, you'll probably want around a 19-21 tooth pinion depending on what motor you get.
You'll also find a ta05 carbon battery strap (TA53884) will help if you want to put a beefy lipo in. Either that or go mad with a dremel on the chassis  . |
ima put on a 8.5/10.5 to start then go to a 6.5, what pinions to use? thanks for the advise, ill definatly get that then
