Quote:
Originally Posted by MP9
May be able to help you there Andy...
I had the same problem on my Dex410 I found it was part number 310013 this is the slipper clutch plate rear check to see if it is warped if so sand it flat with some emery sandpaper you will see the disk sand the plates high spot continue doing this till its all flat....
I had to use a course sandpaper first then used a finer one this fixed my problem...
Hope this helps :-)
|
The trouble with that is your sanding away the had coating and yd up with black greasy filth all over the slipper pads (aluminium powder) and slip too much.