Quote:
Originally Posted by iko
I just put my order @action model centre ,well fingers crossed 
what spares you guys carry or what parts brakes a lot ?
Ive got titanium pivot pins how comes that helps to not break upper arms?
cheeers |
upper front arms,
lower front arms,
the occasional driveshaft,
shock shafts (front mainly)
front knuckles,
front upper suspension arm mount,
front pivot balls,
these are basicaly the only parts that break,
unless you do some crazy jumps then the front of the chassis is prone to breaking, i always keep 3 spare lwb and swb chassis as spares
--------------------------------------------------------------------------------------------------------------
i recommend the alloy upper mount, $24
http://www3.towerhobbies.com/cgi-bin...?&I=LXLYB0&P=7
and i recommend the alloy front knuckles $14.50, (£55 in uk).
http://gpmracing.com.hk/catalog/prod...oducts_id=5796
and i recommend titanium shock shafts,
front:
http://www3.towerhobbies.com/cgi-bin...?&I=LXMSC2&P=7
rear:
http://www3.towerhobbies.com/cgi-bin...?&I=LXMSC3&P=7
and i also recommend these driveshafts $38 a pair:
http://www3.towerhobbies.com/cgi-bin...?&I=LXTZN8&P=7
also i would recommend the titanium pivot balls,
http://www3.towerhobbies.com/cgi-bin...?&I=LXRAJ9&P=7
although you only get 2 and if you buy the normal ones they are cheaper and you get 6, so you could break 3 normal ones compared to 1 titanium,
i use the normal ones and have only broke 2 in a year and a half,
normal ones here:
http://www3.towerhobbies.com/cgi-bin...?&I=LXRAF3&P=7
