Lastly look at the last photo,showing ZX arm with ZX-5 hub LA304. in my next post, look at the picture. The 62.5 bone cannot go in any further, that means also cant adjust more negative camber. Conclusion is i also have to use 60.5 in the rear with ZX-5 hubs. i am waiting for LA-28 to arrive to test if the 62.5 will be perfect for it.[/QUOTE]
the one you are trying to fit in the rear is not the 62.5 its the 65.5 thats why its a perfect fit in the front but not in the rear.
have tried that so i know
where have you bought youre cvds from ???
and yes you have to cut/dremel a little bit in the arm to gain some movment for the la 219
If you have bought the cheaper 3 racing bones they come in lenght of 68 and 65.5 use the shorter one for the front of the zxr
the 60.5 are wierd in that way that the bone yes 60.5 ut the axle itself is longer so the total is not shorter.
If you just follow these instructions
LA-232
and
2st um-510.01 bones and 2st la-231.02 axle
thats what you need have done that and yes they fit
mvh Isobarik
|