Quote:
Originally Posted by Aran
does anyone have a good base setup for carpet indoor?
thanks,
Aran
|
front
0 toe in or out
1 deg camber
shock position on shock tower outer hole
shock position on wishbones outer hole
shock oil 30wt losi oil
standard 55 4 hole piston
silver spring
25 deg kick up shim the flat one
5 deg front hubs
camber rod position on chassis inner hole 1mm spacer
1 mm spacer on front hub
cut stagger with soft insert
rear
2 deg camber
shock position on tower middle
shock position on wishbone middle
shock oil 25 wt losi oil
standard 55 4 hole piston
pink spring
3.5 or 4 deg hrc toe block
2.5mm under gearbox anti squat shim
camber rod position on chassis outer hole 1mm spacer
camber rod position on hub outside furthest rear 1mm spacer
mini pin soft incert
optional 0.75mm wider rear hub
and i run a cougar wing as they are 10mm wider and alot stronger
middle
87gram under battery weight TDS make a great one affordable.
change the diff balls and thrust bearings for the ceramic
also get the associated diff screw and nut because they wont loosen up