[Mr. Pink]

I made a 3mm thick cf top-deck for my FS2 and tried it out on our bumby astro track (green hill). The main difference I noticed was that it evened out the steering feel. On high grip my original lazer tends to over steer and flip if you push hard in the corners. With the top decks the tendency to traction roll was lower. When the track was wet and slippery the car was so nice and stable. Instead of letting go front or rear first when pushing hard, it just drifted sideways.

I made my front top-deck in one piece instead of the 2-piece design from the WC. Many drivers drilled a hole straight through both pieces and fitted a screw and nut to prevent the steering to flex too much.