Quote:
Originally Posted by jkclifford
What a load of crap, unless you've got the smalls torque wrench in the world how would you ever set either side the same, let alone use it as an adjustable brace. The only way a system like that can work is with shoulder bolts done up tight, with differnt graded bushes. Imho.
|
^^^^ What he said, you'll need a torque wrench which measures something like 0-1Nm with a graduations of about 0.05Nm. Not forgetting the variability you'll have in the rubber bushes.
They use a similar thing in some rubber mounts in automotive, but the size of the hardware is such that you are looking at torques of 50Nm, plus its not for tuning per se, so everything is done up to 50Nm, every time.