I run a CR2 at southport as it is my home track.
as northy has said it is about getting the right line across the back section but this setup works perfectley for me
front
camber:-1.5deg
caster: 30deg
swaybar: no
oil: 35wt
piston: Ghea piston
spring: black
limiters: 2mm
spindle hight: high
axle spacer: Narrow
camber link: 2 A 3mm washers under ball stud
shock location: 2 middle
VLA: long
Front wing: None
Rear
toe: 3deg
antisquat: 1deg
camber: 2 deg
rear hub spacing: long
sway bar: no
oil: 27.5
piston: ghea piston
spring: pink
limiters: 2mm
camer: 6 B 3mm limiters
VLA: short
|