Quote:
Originally Posted by WHITTLER555
The outdrives to the driveshafts do wobble a bit because they are running through a rubber seal, no problem with that.
However if the center outdrives are wobbling I would check the two bearings on the propeller shaft/gear, if these feel anything like rough change them immediately as they will eventually wear so much they will damage the main ring gear.
|
That would explain the movement...
The center shaft on mine is rock solid. No sideways movement at all.
I have also done a little mod on my diff case:
I have changed the two screws that clamp around the center input bearings to longer screws, I've put m3 nuts on the top. So there is no risk of stripping the gear casing. So the bearings are always trapped in nice and tight.