Thread: Grip Roll
View Single Post
  #19  
Old 11-08-2011
markwilliamson2001's Avatar
markwilliamson2001 markwilliamson2001 is offline
Mad Member
 
Join Date: Apr 2006
Location: Ledbury, Herefordshire
Posts: 1,889
Send a message via MSN to markwilliamson2001
Default

Try this setup....
Silver roll bar fromt and rear
40wt oil, no.2 piston in front, silver or blue spring
35wt oil no.1 piston in rear, silver spring
22/23mm ride height
Get some weight in the back if you dont have any, the centre weight 87g for the b44.1 is perfect, for lipos.

Trim your rear wing down a bit.
Start with minipins, and a firm foam. You might find that the thinner carcass minispike tyre is collapsing.
I would cut the inside and outside row off the front tyres. If the grip roll is still there, cut another outside row off both front and rear tyres.

Hope this helps.
Mark
__________________
:: AE B5MCE - SP 7.5 v3.0 Brushless Motor - Reedy Shorty Lipo - Savox Servo - Spektrum Rx ::
:: Paint By Turnip Paint ::
Reply With Quote