1st run for my Tardis today on a bumpy astroturf track...
I actually ran with Griff55 setup with the lighter oils and different pistons as i dont have 60wt oil, and was very happy with forward drive and also traction coming out of the bends.
It felt i was lacking a bit of steering so i added 10g on servo and changed to pink rear spings as advised by Dave belsten who was also using his Tardis 22 to good effect
Overall happy with the first outing just need to get a setup that suits my driving
Quote:
Originally Posted by OldTimer
I would use the below setup as a starting setup for the tardis.
Front - 60 wt, 5 hole 1.5mm, Blue or Black spring
Rear - 60 wt, 5 hole 1.5mm, Yellow spring or Pink
4.0 deg HRC
2 deg AS
Front camber - long link, 1mm under both ball studs
Rear camber - 3mm outer 2mm inner, C location out inner hole.
SWB on rear hub
25 deg kickup with 5 deg castor blocks.
110 gram weight under lipos, no other extra weights on the car, no rear bolt on weight either.
|