I would use the below setup as a starting setup for the tardis.
Front - 60 wt, 5 hole 1.5mm, Blue or Black spring
Rear - 60 wt, 5 hole 1.5mm, Yellow spring or Pink
4.0 deg HRC
2 deg AS
Front camber - long link, 1mm under both ball studs
Rear camber - 3mm outer 2mm inner, C location out inner hole.
SWB on rear hub
25 deg kickup with 5 deg castor blocks.
110 gram weight under lipos, no other extra weights on the car, no rear bolt on weight either.
__________________
Jonathan | Atomic-Carbon
|