Quote:
Originally Posted by gainsy
I would use liquid mask to cut the border around the windows, the finished result will be much better this way
Don't be scared of the liquid mask, you can always cut up a old 2/3 litre coke bottle, wash it, stick some mask on & practice your cutting on that, use a new decent scalpal & you will soon get it right
I used to have no confidence in liquid mask but as soon as i started using liquid mask from RCS i haven't looked back, just follow the guide on Jon's website
http://www.rcsgraphicworx.com/
If you put this stuff on properly you wont get any paint bleed & your new shell will look great 
If your putting mask on the outside as well, draw your window lines on the outside, then you have a line to follow when cutting |
ok then LM it is! i have a product made by humbrol - will that be any good? does it need to be applied in one coat only?
__________________
RC10 B3 Team / Losi XX4 WE (in progress!)
Nosram Matrix Evo / Nosram Matrix Reverse
LRP Vector X11 10.5t / Nosram Storm 4.5t
KO Propo 2343 / KO Propo 2173
Sanwa RX 311
Sanwa Super Exzes
Trakpower & Bionic
Bantam BC6
|