Quote:
Originally Posted by muratti
I agree with you , Dave, only both you and Jamie forgot about the standard DB01 arms which are 51311 for the front and 51313 for the Rear. Have exactly the same geometry and thickness like the 501 arms but are way softer, nevertheless they tend to bend the hinge pin too just like the 501 arms BUT they cost nearly half of the 501X arms thatīs why i always use them on my 4WDs.
Dave, what cut out do the 51449 have for 2WD? Never realized that!
|
There's a cutout on the inner part of the wishbone to stop it fouling the outdrive under compression! I have seen some 4wd high traction arms with them, and some without, so I just buy the 51449 now!