[DerbyDan]

Originally Posted by Ema

Try to ask this question on rc10talk .... if you haven't already asked !

If you have the chance .... check the lenght of the UJs of the TT Phoenix buggy (http://www3.towerhobbies.com/cgi-bin...?&I=LXAKRJ&P=Z).

Bye
Ema

I'd be interested to hear if these work.... my mate runs a B3 & has had the same problem with the drive shafts popping out.... we solved the problem with spacer shims on the axle & limiting the suspension droop (the latter compromises the set-up) But the damage has already been done with the outdrives & dogbones both getting chewed up